5. Troubleshooting
There are several errors or fault codes that generally can be solved by the operator:
When the Trim Waste Bin is full or trim
waste is prevented from falling down
into the Waste Bin, the message
‘Empty Trim Bin' will be displayed (Fig.
1).
When a Paper Jam appears, like Clear
Area, the message ‘Error STR…’ will
be displayed.
Fig. 1
5.1 Trim Waste Bin Full
A
Fig. 2
Fig. 3
Step Action
Remarks
1.
Open the Trim Drawer.
(Fig. 2)
2.
Empty Trim Waste bin(s) (A).
(Fig. 3; some versions have two waste bins)
3.
Remove the remaining trim
Waste.
Attention: It is possible that there is still some
trim waste left inside the STR.
4.
Place the Trim Waste bin(s) back
in the Drawer.
(Fig. 3)
5.
Close the Trim Waste Drawer.
(Fig. 2)
17
Summary of Contents for BT 30
Page 24: ...24...
