background image

23 

 

7. Technical information  

 
 

Capabilities: 
 

 

Electrical: 

 

 

 

 

 

 

Compatibility:  Standalone BT 30: 

 

       

60Hz:

 

220/230V, 2.0A 
 

 

 

 50Hz:

 

220/230V, 2.0A 

 

  

 

60Hz: 

100/110/120/127V, 4.0A 
(upon request) 

Capacity:

 

 

Up to 25 sheets 
(80 g/m

, 100 pages booklet) 

 

 

 

 

 

 

 

 

 

 

The Bleed Trimmer should only be connected to 
an approved electrical system which is rated at 
a maximum of 16A and which is protected by 
circuit breakers. 

 

Physical: 

 

 

 

 

Operational 

On Pallet in box 

 

Height 

1200 mm 

1440 mm 

 

Width 

700 mm 

760 mm 

 

Depth 

1510 mm 

1410 mm 

 

Weight 

~208 kg 

~250 kg 

 

 

Booklet specifications 

 

 

 

 

before trimming: 

 

trimmed: 

Minimum booklet height:

 

204 mm 

 

200 mm 

Maximum booklet height:

 

340 mm 

 

320 mm 

 

Technical specifications 

 

 

 

 

 

Speed 

1800 booklets/hour 

 

Trimming size (min-max) 

2mm - 35mm each side 

4mm - 70mm together 

Paper Weight (min-max) 

60 g/m

 - 

300 g/m

 

 

A-symmetrical trim (min-max) 

±15mm 

 

Input / Output sheets 

Booklet Width (X) from 50 mm 
up to 245 mm 
Booklets Height (Z) 204 mm 
up to 340 mm         

Note: Heights between 320 
mm and 340 mm must be 
trimmed back to 320mm or 
shorter.

 

Booklet Staple Clearance from 
top/bottom (minimal) 

40mm  

Noise Level (max) 

70dB  

 

Summary of Contents for BT 30

























Reviews: