1. Safety
-
The Bleed Trimmer may only be plugged into an approved and by circuit breakers protected
electrical installation, secured with a maximum of 16A.
-
The outlet socket shall be installed near the equipment and shall be easily accessible.
-
Never put your hands, other body parts or anything else than booklets within specifications in
the infeed or outfeed area of the Bleed Trimmer.
-
Before cleaning, maintenance or repairs; always be sure to switch off the power switch and
to disconnect the power cord.
-
Always follow all warnings marked on or supplied with the equipment.
-
The equipment should only be placed on a solid surface with adequate strength to hold the
weight of the machine besides the usual maximum load.
-
Always exercise care while moving or relocating the equipment.
-
Keep magnets and all devices with a strong magnetic field away from the machine.
-
Never attempt to perform maintenance or repairs other than described in this manual.
-
Never remove covers or guards that are fastened with screws.
-
Never install the equipment near a radiator or any other heat source.
-
Never override or bypass electrical or mechanical interlock devices.
-
In case of unusual sounds or noises, abnormal surface temperature or odors; disconnect the
power immediately and consult a qualified technician.
The manufacturer cannot be held responsible for arbitrary changes in the machine and the
originated damage.
Make sure that the Bleed Trimmer is NOT powered during installation or service activities.
This is a Class A product. In a domestic environment this machine may cause radio
interference. In which case the user may be required to take adequate measures.
Note:
A domestic environment is an environment in which radio and television receivers can
be expected inside a range of 10 meters of the concerning machines.
RoHS
compliant
The Bleed Trimmer is RoHS compliant.
Only use RoHS compliant replacement parts.
4
Summary of Contents for BT 30
Page 24: ...24...
