9
What You Can Do With This Machine
The Booklet Maker BK5030, Trimmer TR5030, Book Folder BF5030 and Cover Feeder CF5030
forms a booklet making system that works online with the Copier.
The print-outs from the Copier are collected in the finisher and then transported into the BK5030
Booklet Maker to the staple area. From the CF5030 Cover Feeder (optional), if present, any
type of covers, colored or black and whites, can be added to the printed set. The Booklet
Maker now jogs and then staples the set. The set is then transported further to the folding
area where the set is folded into a booklet and then fed out to the belt stacker. When a larger
number of sheets are folded an effect called creeping occurs. In order to rectify creep, the
TR5030 Trimmer (optional) can be attached after the Booklet Maker. The booklets are then
transported from the Booklet Maker into the Trimmer where the trail edge will be cut off. If a
TR5030 Trimmer is installed to the BK5030 Booklet Maker, you can attach the BF5030 Book
Folder (optional). The printouts, which have been stapled, folded and trimmed will be fed
into the BF5030. The BF5030 will flatten the spine of the booklet square. The booklets will,
after passing the BF5030, have the look of a perfect bound book. The booklets are then fed
out to the Belt Stacker.
To facilitate undocking, a BK5030 Rail unit (optional) can be installed under the Booklet Maker.
Undocked or off-line, the Booklet Maker can be used as a stand-alone unit for hand feeding.
CF5030 Cover Feeder (option)
TR5030 Trimmer (option)
BK5030 Booklet Maker
BK5030 Rail unit(option)
BF5030 Book Folder (option)
Belt Stacker
Summary of Contents for BK5030
Page 6: ...Page intentionally blank ...
Page 50: ...6 50 Page intentionally blank ...
Page 62: ...Page intentionally blank ...
Page 64: ......