manualshive.com logo in svg

Plockmatic BK5030, Operating Instruction

Looking for the Plockmatic BK5030 Operating Instruction manual? Look no further! Download your free manual from manualshive.com, where you can find a comprehensive guide on how to effectively operate the BK5030. Get all the information you need to maximize the potential of this fantastic product.

Share
Download
background image

6

48

Code “CF-501 Load covers” is displayed when covers run low. There are two ways to continue 

operation.

Loading more cover sheets:

Load more cover sheets according to section 2. Making Booklets and press the [Done] 

button. Code CF-501 will extinguish and copier will start.

Using up the remaining cover sheets that are loaded:

Press the [ESC] button. Code CF-501 will extinguish and copier will start.

 

Note

Be aware that if you use this method, the system will hard stop i.e. without completing 

the cycle when there is no covers left.

Code “CF-503 Load covers” is displayed when covers are empty. There are two ways to 

continue operation.

If you wish to continue production:

Load cover sheets according to section 2. Making Booklets and press the [Done] button. 

Code CF-501 will extinguish and copier will start.

If cover job is finished and you wish to run a new job without covers:

Select Cover Off in the Cover menu.

Load covers

Cover feeder fault codes, continues

Summary of Contents for BK5030

































































Reviews:

No comments

Related manuals for BK5030

Brands by name

Popular brands

Load more brands