manualshive.com logo in svg

Plockmatic BK5030, Operating Instruction

Looking for the Plockmatic BK5030 Operating Instruction manual? Look no further! Download your free manual from manualshive.com, where you can find a comprehensive guide on how to effectively operate the BK5030. Get all the information you need to maximize the potential of this fantastic product.

Share
Download
background image

51

7. 

REMARKS

Do’s And Don’ts

•  Always follow all warnings marked on, or supplied with, the equipment.

•  Always exercise care in moving or relocating the equipment.

 Caution:

•  Unplug the power cord from the wall outlet and machine before you move or relocate  

 

the equipment.

•  Do not remove the covers or guards that are fastened with screws.

•  Do not override or bypass electrical or mechanical interlock devices.

•  Do not operate the equipment if you notice unusual noises or odors. Disconnect the   

 

power cord from the power source and call your authorized technician to  

 

 

 

correct the problem.

 Warning:

•  Do not put fingers or other parts of the body between the upper and lower trimmer    

 knives.

•  Do not switch off the main power switch while machine is running. Make sure machine  

 

cycle has ended.

•  Do not open covers while machine is running.

•  Do not move machine while machine is running.

Summary of Contents for BK5030

































































Reviews:

No comments

Related manuals for BK5030

Brands by name

Popular brands

Load more brands