background image

107 

With either of these types of CD, when using PLEXTALK, additional audio 

can be added to the disc until it is full.  Use of PLEXTALK's editing 

functions to cut sections of the recording, will not free up space on either 

type of disc, it only makes those pieces of audio 'invisible' to the listener.  
You can only free up space on a CD-RW disc by using PLEXTALK's erasing 

function or by reformatting the CD-RW using a computer.  

 

In addition to categorising CDs by whether they can be used more than 

once or not, they can also be categorised by whether they are "data" CDs 
or "music" CDs.  Data CDs can be used on a computer to create many 

different types of finished CD such as file backups, picture CDs, Audio File 

CDs and so on.  In PLEXTALK, data CDs can only be used to create DAISY 

format recordings.  If you want to create a Music CD, which can be played 

in a standard CD player, you need to use blank Music CD-R or CD-RW discs.  
In PLEXTALK, Music CDs cannot be used to make DAISY recordings and 

can only be used to make Music CDs.  PLEXTALK will automatically detect 

the type of CD that you insert.  Blank Music CDs tend to be more 

expensive than blank data CDs. 

 
On all CDs, on one of the sides, a  small ridge can be found about 1 

centimetre away from the centre hole.  The side with the ridge is where 

the data is burned.  Data cannot be burned to the disc properly if there are 

scratches or fingerprints on the area outside the ridge. 

 
CAUTION:  Before using a CD for recording, check for dirt, fingerprints or 

scratches on the surface of the disc.  If there are any marks, clean the CD 

using the supplied soft cloth. 

CAUTION:  Whenever you erase a CD-RW on a PC, make sure that you 

choose the "Full erase" setting. 
 

16.2.2.  About CF cards. 

 

In PLEXTALK, you can use a CF card to record and edit DAISY titles and you 

can erase and rerecord as many times as you want. 

 

PLEXTALK will work with CF cards with a range of capacities.  Before 
purchasing an additional CF card for use with PLEXTALK, you should 

ensure that it is compatible.  You are advised to read the section called 

"Recommended CF cards" in Appendix A, or contact your PLEXTALK dealer 

for advice. 

Summary of Contents for PTR 2












































































































































































































































Reviews: