Plextor PTR 2 User Manual Download Page 196

Page: 196 / 235

197

Appendix A - Main specifications.

NOTE: Shinano Kenshi reserves the right to modify the products

specification at any time without prior notice.

Main Specifications.

This section details the main specifications for the PLEXTALK PTR2.

Loading system:

•

Slot insertion

Compatible CDs:

•

12cm diameter CD, CD-R and CD-RW discs. PLEXTALK is only

compatible with round 12cm CDs. 8cm CD and irregularly shaped

CDs, such as the business card type, will cause a malfunction and

should not be used.

Playable contents:

•

Books conforming to DAISY 2.02 and DAISY 2.0 standards

•

Music CDs (CD-DA)

•

Audio file CD or CF cards. Audio files include MP3, Ogg Vorbis and

Wave (PCM)

Playable audio formats for DAISY books:

•

MP3, MP2, DAISY ADPCM2, PCM.

Recording methods:

•

DAISY 2.02

•

Music CD format (CD-DA)

Recording audio formats for DAISY 2.02:

•

PCM 44.1kHz Stereo

•

PCM 22.05kHz Mono (Book creator mode only)

•

MP3 256kbps Stereo

•

MP3 128kbps Stereo

•

MP3 64kbps Mono

•

MP3 32kbps Mono

Summary of Contents for PTR 2












































































































































































































































Search results

Summary of Contents for PTR 2

Reviews:

Related manuals for PTR 2

Brands by name

Popular brands

Plextor PTR 2, User Manual

Search results

Summary of Contents for PTR 2

Reviews:

Related manuals for PTR 2

Brands by name

Popular brands