Plextor PTR 2 User Manual Download Page 175

Page: 175 / 235

176

NOTE: When PLEXTALK is connected as an external memory card drive, it

will only become listed, as a removable disc in "My Computer" and

"windows Explorer", when the CF card is inserted.

NOTE: As soon as PLEXTALK recognises the connection to the PC, it
becomes an external drive for the PC and loses all its player and recorder

functionality.

21.4.2. Connecting to a PC running Windows 98 Second
Edition.

REMINDER: PLEXTALK cannot be used as an external memory card drive

with PCs running Windows 98 Second Edition.

If you have a PC with Windows 98 Second Edition (Windows 98SE), you

will have to install two small pieces of software, known as a controller and
a driver, on your PC, before PLEXTALK will be recognised as an external

CD-R/CD-RW drive. The controller and driver software is included on the

User's Guide CD.

To install the necessary software for Windows 98 Second Edition, do the
following:

•

Turn ON your PC system.

•

Insert the User's Guide CD into your PC's CD drive. Do not insert

the User's Guide CD into PLEXTALK as it has not yet been

recognised by your PC.

•

Connect the AC adaptor to PLEXTALK.

•

Turn PLEXTALK's power switch ON.

•

Connect the USB cable from PLEXTALK to the PC.

Summary of Contents for PTR 2












































































































































































































































Search results

Summary of Contents for PTR 2

Reviews:

Related manuals for PTR 2

Brands by name

Popular brands

Plextor PTR 2, User Manual

Search results

Summary of Contents for PTR 2

Reviews:

Related manuals for PTR 2

Brands by name

Popular brands