157
•
Press the Record key once. PLEXTALK will ask you to select the first
phrase that you want to cut from the recording.
•
Use the Number 4 or 6 key to move to the first phrase you want to
cut and select it by pressing the Enter key. PLEXTALK will then ask
you to select the last phrase to cut.
•
Use the Number 4 or 6 key to move to the last phrase to cut and
select it by pressing the Enter key.
•
Press the Record key again and recording will start.
•
When you have recorded the new audio, press the Play/Stop key to
stop recording.
When you review your recording, you will see that the phrases that you
specified for deletion have been replaced with the new audio.
NOTE: You do not need to worry about the length of the new audio as
PLEXTALK will automatically fit it into the existing recording.
19.4.5. Overwrite recording.
Overwrite recording enables you to correct mistakes during the recording
process. This method can be used during both the "Insert" and "Punch-in"
methods of recording, but is only available in the recording pause state.
To use the Overwrite recording method, do the following:
•
Initiate recording in the "Insert" or "Punch-in" method as detailed
above.
•
During recording, when you notice an error, press the Record key
once to pause recording.
•
Repeatedly press the Back key to move to the location of the first
phrase to be rerecorded. PLEXTALK will play each phrase as you
move.
•
Press the Record key to start recording again.
•
When you have recorded the new audio, press the Play/Stop key to
stop recording.
When you review the recording, you will see that the initially recorded
error has been replaced by the correction.
Summary of Contents for PTR 2
Page 1: ...Portable Recorder PTR 2 User s Guide...
Page 235: ...236...
