Plextor PTR 2 User Manual Download Page 118

Page: 118 / 235

119

•

If required, connect a set of stereo headphones to the headphone

socket on the left side of PLEXTALK. (See the note below)

•

Press the Bookmark key once to turn the recording monitor off.

•

Press the Bookmark key again to turn the recording monitor on.

•

As you switch the recording monitor on or off, PLEXTALK will

announce which setting is active.

NOTE: In order to avoid acoustic feedback, when recording using the

internal microphone or an external microphone, you will only be able to

control the recording monitor when you are wearing headphones. You

do not require headphones when recording from a line in source.
NOTE: For all recordings, PLEXTALK will automatically turn on the

recording monitor by default.

Summary of Contents for PTR 2












































































































































































































































Search results

Summary of Contents for PTR 2

Reviews:

Related manuals for PTR 2

Brands by name

Popular brands

Plextor PTR 2, User Manual

Search results

Summary of Contents for PTR 2

Reviews:

Related manuals for PTR 2

Brands by name

Popular brands