Plextor MEDIAX PX-MX Series, Manual

Page: 25 / 63

25 of 63
5. Once you have finished transferring your files and are finished on the
computer, please turn off your PleXtor MediaX power and turn it on
again after you have connected to your TV.
You can connect the USB cable while your PleXtor MediaX is running. The
following OSD will appear on your TV
When your PleXtor MediaX goes into USB mode the OSD on TV will disappear.
Your PleXtor MediaX will go into normal mode when you disconnect the USB
cable.
In this case please turn the power off and on again.
2.0 As a Host – Multi way file copy
You can copy files from an attached USB hard drive, USB memory stick and even
from your Local Area network without attaching the your PleXtor MediaX to a PC.
In the Guide Menu go to the COPY section. In this section you will see.
Select OK by pressing the Enter
button.
Select Cancel by pressing the
► then
Enter.
If neither are selected a 20 second
timer will count down and your
PleXtor MediaX will automatically
go into USB mode
Press the ▲▼ buttons in order to
select the Source (copy file from)
then press the Enter button
The curser will jump to the
Destination table
Press the
▲▼ buttons in order to
select the destination then press the
Enter button