Section 1. Getting Started
PlexWriter 16/10/40 Operation Manual
5
Rear Panel
Figure 2: Rear Panel of the PlexWriter 16/10/40A Internal Drive
•
Digital audio output connector: Outputs digital stereo signal. For connecting to
a sound board that supports Sony/Philips digital interface (SPDIF) or Digital_In.
•
Analog audio output connector: Outputs analog stereo signal. Use to connect to
sound board or audio amplifier. Use standard MPC-3 type, 4-pin connector.
•
Jumper: Use to select operation as an IDE master or slave, or for cable select. In
general, leave this jumper at its factory setting.
•
IDE cable connector: Connects to IDE interface using 40-pin IDE flat ribbon
cable.
•
Power connector: Connects to your computer’s power supply to provide
DC +5V and +12V to the PlexWriter.
