Appendix A: PlexWriter Specifications
PlexWriter 16/10/40 Operation Manual
51
Front Panel
Eject
Eject Button; Manual Emergency Eject; Software Eject
Indicator LED
Green: Power on and disc is in drive
Yellow: Initializing or reading disc
Blinking orange: Writing data to disc
Disc Loading
Auto
Headphone Jack
Stereo mini-jack, 0.8V +/- 0.2V at 32 ohms
Headphone Volume
Control
Wheel knob
CD-Audio Controls
Stop/Eject
Rear Panel
Power Supply
DC +5V: Average 600 mA during writing, 700 mA during
reading
DC +12V: Average 1 A during writing, 800 mA during
reading
Interface Connector
IDE bus, 40-pin flat ribbon type. Interface complies with
ANSI X3T13/1153D (ATA/ATAPI-4). Supports CD-ROM
commands, including special commands for CD-R and
CD-RW.
Analog Audio Output
Stereo analog output, Molex connector (L*G*G*R),
MPC3 standard
Digital Audio Output
Digital audio output for input to SPDIF or Digital_In input
Jumper Switch
Master, Slave, Cable Select
Environmental Conditions
Operating Temperature
0 to 45 degrees Celsius
Performance Guarantee
Temperature
5 to 40 degrees Celsius
Operating Humidity
20% to 80% (non-condensing)
Storage Temperature
–40 to 60 degrees Celsius
Storage Humidity
20% to 95% (non-condensing)
