c. Make sure that the suction bond is strong enough before proceeding to the next step.
d. Insert the pegs into holes in back of cradle and then move the cradle downwards while holding mounting arm
firmly until both parts are locked in place.
4. Dock the device on the cradle.
5.
Adjust the car mount
for the best viewing angle.
6. After setting up the device on the car mount, connect the car charger.
If the car engine is turned off, you may need to switch the vehicle ignition back into the Accessories position.
Consult your vehicle owner
’
s manual.
7. Connect the car charger to the power connector on the cradle.
8. Plug the other end of the car charger to your vehicle
’
s cigarette lighter.
9. The power LED indicator lights up orange during charging. The hot keys backlight is also lit up.
The device comes with the battery pre-charged to at least 30% capacity. You can start using it once it is
mounted in your vehicle and connected to the cigarette lighter. However, for maximum usage time you need
to charge your device to full capacity. Go to the
“
Recharging the device
”
section for instructions.
14
First things first
VXA-5000/4300 setup
Spacer Monitor
Summary of Contents for VXA-4300
Page 1: ...4 1 Version...
Page 93: ......
