•
The heating and cooling cycle of a vehicle
'
s interior can loosen the adhesion of the suction cup. Check the vacuum seal
of the car mount for adequate adhesion each time you use the unit, and reinstall if necessary.
•
If the car mount has problem staying on, clean the plastic suction cup with alcohol, then reinstall. Moistening the
suction cup may help adhesion in some cases.
•
To avoid extreme temperature from damaging the car mount, remove the unit if the temperature inside your
vehicle exceeds 70
°
C (160
°
F).
•
The dip in humidity and temperature at night can loosen the adhesion of the suction cup. For this reason, as well
as for security, it is recommended that you remove both the car mount kit and the VXA-5000/4300 when leaving
your vehicle overnight.
Storage precautions
•
Do not store the device anywhere it may be exposed to water or in conditions of high humidity.
•
When the device is not in use for an extended period of time, bring it indoor and store it in a location with
temperature range of -20
°
to +70
°C
(-40
°
to 140
°
F)
.
Cleaning the VXA-5000/4300
•
Use a damp soft dry cloth to wipe the device
’
s casing (not the display screen). Never use organic solvents such as
benzene or paint thinner to clean the device. Use of these solvents can cause deformation or discoloration.
•
Use a soft, clean, lint-free cloth to clean the display screen. Moistened LCD screen wipes could also be used as required.
Troubleshooting the VXA-5000/4300
Recalibrating the screen
If tapping an item doesn
’
t bring up the appropriate response, it means your device has lost its calibration. Recalibrate
the screen.
78
System maintenance and user support
Cleaning the VXA-5000/4300/Troubleshooting the VXA-5000/4300
Summary of Contents for VXA-4300
Page 1: ...4 1 Version...
Page 93: ......
