PlayNation Play Systems 1500DT, Manual

Page: 79 / 145

USE HOLE AS A TEMPLATE TO DRILL
GO THROUGH
3/8" HOLE THROUGH THE 4 X 4 CENTER
#8 X 3" SCREWS
MIDDLE DECK
SCALE 1 : 8
DETAIL B
T-NUT
BOARD
POST.
TWO
WASHER
5/16"
INTO 4 X 4
INTO 4 X 4
BOARD
FRONT FACE
HEX BOLT
5/16" X 4-1/2"
THREE
#8 X 3" SCREWS
GO THROUGH
4 X 4 X 72"
CENTER TARP
SUPPORT
HEX BOLT
2 X 4 X 71-7/8"
SUPPORT
5/16"
CENTER TARP
BOTTOM PANEL BOARD
SCALE 1 : 8
DETAIL A
5/16" X 2-1/2"
WASHER
RAILING
5/16" T-NUT
#8 X 2-1/2"
WOOD SCREWS
STEP 20: CENTER POSTS FRONT/REAR
1: HAMMER A T-NUT INTO THE HOLE OF THE 2 X 4 X 71-7/8" CENTER TARP SUPPORT.
2: PLACE THE CENTER POST INSIDE THE RAILING AT THE REAR OF THE PLAYSET. LINE UP THE HOLE IN THE
CENTER POST WITH THE HOLE IN THE RAILING. FASTEN THE CENTER POST TO THE RAILING WITH A 5/16" X 2-
1/2" HEX BOLT AND A 5/16" WASHER AT THE TOP. SQUARE THE CENTER POST TO THE DECK AND SECURE THE
BOTTOM OF THE CENTER POST TO THE BOTTOM PANEL BOARD WITH #8 X 2-1/2" WOOD SCREWS.
3: PLACE THE 4 X 4 X 72" CENTER TARP SUPPORT INSIDE THE RAILING AT THE FRONT OF THE PLAYSET. CENTER
THE POST BEHIND THE HOLE. USE THE HOLE AS A TEMPLATE TO DRILL A 3/8" HOLE THROUGH THE CENTER
POST. HAMMER A T-NUT INTO THE CENTER POST HOLE YOU JUST DRILLED. FASTEN THE CENTER POST TO THE
RAILING WITH A 5/16" X 4-1/2" HEX BOLT AND 5/16" WASHER AT THE TOP. SQUARE THE CENTER POST TO THE
DECK AND SECURE THE BOTTOM OF THE CENTER POST TO THE FRONT FACE BOARD WITH TWO #8 X 3"
SCREWS. NOW GO UNDER THE DECK AND SECURE THE CENTER POST TO THE MIDDLE DECK BOARD WITH
THREE #8 X 3" SCREWS.
2 X 4 X 71-7/8"
CENTER TARP SUPPORT
RAILINGS
A
BOTTOM PANEL
BOARDS 4 X 4 X 72"
CENTER TARP SUPPORT
B
69