manualshive.com logo in svg

Playcore ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N, Assembly Instructions Manual

The Assembly Instructions Manual for the Playcore ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N is available for free download from manualshive.com, ensuring a seamless installation process. This essential manual provides step-by-step guidelines to effortlessly assemble and set up your new uPLAY TODAY MADDIE'S CHASE UPLAY-006-N, guaranteeing hours of endless fun and excitement.

Share
Download
background image

Parts List

PART NUMBER

QTY

DESCRIPTION

02-07-0157

1

BARRIER LEFT

02-07-0156

1

BARRIER RIGHT

02-07-0043

4

1" FOOTER

02-07-0155

1

ADA TRANSFER STAIR

02-07-0004

1

ADA DECK

02-07-0047

1

ADA DECK SUPPORT POST

02-07-0011

1

ADA HANDHOLD

02-07-0006

1

ADA STEP

02-07-0060

2

8 1/4" EXTENSION POST

02-07-0061

2

15" EXTENSION POST

02-07-0046

2

FOOTER PLATE

33-12-0079

1

 

33-11-0003

13

M10 x 25mm (1") BHCS BOLT

33-11-0005

8

M10 x 35mm (1 3/8") BHCS BOLT

33-11-0010

4

M10 x 50mm (2") BHCS BOLT

33-11-0007

2

M10 x 60mm (2 3/8") BHCS BOLT

33-11-0200

32

M10 FLATWASHER

33-11-0400

27

M10 LOCK NUT

33-11-0103

12

M8 x 25mm (1") BHCS BOLT

33-11-0301

4

M8 LOCKWASHER

33-11-0500

8

M8 LOCK NUT

33-11-0700

4

CLAMP RIVET

HARDWARE COMPLETE

Issued/Revised: 

3FT. ADA STEPS 02-07-5039

u

PLAY TODAY

800.458.5872

www.ultraplay.com

 

48

 

8/23/2013

Items listed below Hardware Complete line are included with Hardware Complete Number

Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store

Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any

Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end

protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement.

Promptly cut-off flush, file smooth, and treat to prevent corrosion.

Unless Otherwise Specified, All Units of Measure are Each

Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.    

Note: Loctite (supplied by others) should be used on any non-patch hardware.

INSTALLATION INSTRUCTIONS:

IMPORTANT: DETERMINE WHICH MOUNTING OPTION YOU ARE USING; SURFACE MOUNT, ONGROUND, OR IN-GROUND.

1. Choose the appropriate hole in Barrier Footer for your surfacing application.

2. Attach Barriers to Barrier Footers using M10 x 35mm B.H.C.S. Bolt and M10 Lock Nut. See Detail 028.

3. Attach Barriers to Tube Clamps using M8 x 25mm B.H.C.S Bolt and M8 Lock Washer. See Detail 029.

4. Attach Tube Clamps to Uprights using M8 x 25mm B.H.C.S. Bolt and M8 Lock Nut. See Detail 030. (Do not install Clamp Rivet until

entire unit is assembled)

5. Clean all slots in stairs, decks, and steps with utility knife if necessary.

6. Attach ADA Transfer Step to Deck using M10 x 25mm B.H.C.S. Bolt, M10 Flat Washer, and M10 Lock Nut. See Detail 031.

Summary of Contents for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N























































































Reviews:

No comments

Related manuals for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N

Backyard Discovery Aurora Owner'S Manual & Assembly Instructions preview
Aurora
Brand: Backyard Discovery Pages: 51
ORORO HEATED VEST Manual preview
HEATED VEST
Brand: ORORO Pages: 16
KBT helica 280.041 Instructions For Use Manual preview
helica 280.041
Brand: KBT Pages: 36
CITC A/C Air Launcher 101050 Operating Instructions Manual preview
A/C Air Launcher 101050
Brand: CITC Pages: 10
Langmatz EK 533 plus 2.0 Operating Instructions Manual preview
EK 533 plus 2.0
Brand: Langmatz Pages: 60
Quick Attach QUICK POWER SCAPE Mini Operation & Maintenance Manual preview
QUICK POWER SCAPE Mini
Brand: Quick Attach Pages: 24
HAGS NRG Everglades Manual preview
NRG Everglades
Brand: HAGS Pages: 9
Aputure LightStorm LS 60d Product Manual preview
LightStorm LS 60d
Brand: Aputure Pages: 40
Komshine KFL-11P Instructions For Use preview
KFL-11P
Brand: Komshine Pages: 2
PAS Systems International PAS V Calibration Manual preview
PAS V
Brand: PAS Systems International Pages: 16
QualArc PCSDB-MD Assembly/Installation Instructions preview
PCSDB-MD
Brand: QualArc Pages: 2
Petzl Ascension B17 Series Technical Notice preview
Ascension B17 Series
Brand: Petzl Pages: 4
Metacon-Next RGC / OHD-C Installation Instructions preview
RGC / OHD-C
Brand: Metacon-Next Pages: 4
STUDIO DUE Archibar ST80 Monochromatic User Manual preview
Archibar ST80 Monochromatic
Brand: STUDIO DUE Pages: 20
BGS technic 62646 Instruction Manual preview
62646
Brand: BGS technic Pages: 3
American DJ DJ Spot LED Features preview
DJ Spot LED
Brand: American DJ Pages: 1
Renfert SILENT compact Quick Reference Card preview
SILENT compact
Brand: Renfert Pages: 4
EMS Hu-Friedy PIEZON 150 Operation Instructions Manual preview
Hu-Friedy PIEZON 150
Brand: EMS Pages: 72

Brands by name

Popular brands

Load more brands