Playcore ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N Assembly Instructions Manual Download Page 73

Page: 73 / 86

Parts List

PART NUMBER

QTY

DESCRIPTION

02-07-0173

5FT DOUBLE STRAIGHT SLIDE

02-07-0174

DOUBLE SLIDEHOOD

02-07-0192

DOUBLE SLIDE DECK FILLER

02-07-0193

CLAMP DOUBLE SLIDE

02-07-0191

MID SUPPORT BRACKET

02-07-0190

BOTTOM BRACKET

02-07-0202

EXTENSION TUBE

02-07-0046

FOOTER PLATE

02-07-0043

1" FOOTER

33-12-1036

33-11-0003*

M10 x 25mm (1") BHCS BOLT

33-11-0005*

M10 x 35mm (1 3/8") BHCS BOLT

33-11-0013*

M10 x 45mm (1 3/4") BHCS BOLT

33-11-0200*

M10 FLATWASHER

33-11-0201*

M10 LOCKWASHER

33-11-0400*

M10 LOCK NUT

33-11-0102*

M8 x 20mm (3/4") BHCS BOLT

33-11-0103*

M8 x 25mm (1") BHCS BOLT

33-11-0104*

M8 x 30mm (1 3/16") BHCS BOLT

33-11-0300*

M8 FLATWASHER

33-11-0500*

M8 LOCK NUT

33-11-0700*

CLAMP RIVET

HARDWARE COMPLETE

Issued/Revised:

5FT DOUBLE SLIDE 02-07-5065

PLAY TODAY

800.458.5872

www.ultraplay.com

4/28/2017

Items listed below Hardware Complete line are included with Hardware Complete Number

Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store

Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any

Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end

protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement.

Promptly cut-off flush, file smooth, and treat to prevent corrosion.

Unless Otherwise Specified, All Units of Measure are Each

Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.

Note: Loctite (supplied by others) should be used on any non-patch hardware.

INSTALLATION INSTRUCTIONS:

IMPORTANT: DETERMINE WHICH MOUNTING OPTION YOU ARE USING; SURFACE MOUNT, ONGROUND, OR IN-GROUND.

1. Trim out slots with utility knife if necessary.

2. Attach Double Slide Deck Filler to Deck using M10 x 25mm B.H.C.S. Bolt, M10 Flat Washer, and M10 Lock Nut. See Detail 031.

3. Attach Bottom Brackets to bottom of Double Slide using M8 x 20mm B.H.C.S. Bolt, M8 Lock Washer and M8 Flat Washer. See

Detail 075.

4. Attach Mid Support Bracket to Double Slide using M8 x 20mm B.H.C.S. Bolt, M8 Lock Washer and M8 Flat Washer. See Detail 076.

5. Attach Double Slide to Double Slide Deck Filler using M10 x 45mm B.H.C.S. Bolt, M10 Flat Washer and M10 Lock Nut. See Detail 072.

6. Attach Clamp Double Slide to Double Slide Hood using M8 x 30mm B.H.C.S. Bolt. See Detail 074.

Summary of Contents for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N























































































Search results

Summary of Contents for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N

Reviews:

Related manuals for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N

Brands by name

Popular brands

Playcore ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N, Assembly Instructions Manual

Search results

Summary of Contents for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N

Reviews:

Related manuals for ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N

Brands by name

Popular brands