43
Assembly Instructions
Swing Seat Assembly
1.
Hold the swing seat vertically and insert uncoated chains through the channels on the bottom of the swing seat.
Note:
A coat
hanger may be used to help pull chain through the swing seat. One full link should show at each end of the seat
(Fig. 32)
.
2.
Place one covered chain onto each harness so that it fits at the top of the V-hanger. Insert uncoated chains to bottom vinyl hooks of
V-hanger.
(Fig. 32a)
. Crimp harness end closed.
CAUTION: It is important that you crimp harness ends completely closed before using (see Fig. 32a).
Place end
of harness with hooks on a hard surface and force hooks closed with a hammer or squeeze closed with a pliers until parts are
touching.
WARNING: Open hooks can cause deep cuts.
3.
Hang the chains from the nylon bushing swing hangers. Crimp the hook opening closed with a pliers to secure the chains to the
swing hangers
(Fig. 32b)
. Make sure all connections are tightly crimped and secure before using swing seat.
Fig. 32
Fig. 32a
Fig. 32b
Swing Seats
8''
Swing Ground Clearance
Note:
Once installed, there must be a minimum 8'' clearance between the bottom of the swings and the surfacing.
