17
Assembly Plan
14-1/2''
18''
32-1/2''
14-1/2''
TWO CHILD SWING
MOUNTS HERE
Fig. 10
A-FRAME ATTACHES
HERE
x4
4-1/4''
Swing Hanger
Washer
Loc Nut
Fig. 10b
18"
2''
Carriage Bolt
Loc Nut
Washer
Bolt Cover
(2)
2-1/2'' screws
(2) [PF 3662] 2'' x 4'' x 20''
(3)
2-1/2''
screws
per bracket
2'' x
4'' x
20''
Fig. 10a
Fig. 10c
Two Child Swing Supports:
1.
Along top of Swing Beam mark placement for Two Child
Swing 2'' x 4'' Supports as shown in
(Fig. 10)
.
2.
Position four beam brackets (right and left) in position
on beam making certain the outside of the braces are
18'' apart and the nailing edge of the bracket is flush
with the top of the beam
(Fig. 10a)
. Attach using three
2-1/2'' screws per bracket.
3.
Attach four swing hangers to the supports using 5/16''
flat washers and loc nuts as shown in
(Fig. 10b)
.
4.
Attach using two 2'' Carriage bolts, 5/16" flat washers
and loc nuts per bracket
(Fig. 10a)
.
5.
Place Bolt Covers over the top of the swing hangers and
loc nuts. Secure to the supports using 2-1/2'' screws per
Bolt Cover, as shown in
(Fig. 10c)
.
Summary of Contents for Swing-N-Slide PB 8233
Page 82: ...42 Assembly Plan ...
Page 83: ...43 Assembly Plan ...
