Platinum 13000 TL Installation And Operating Manual Download Page 78

Page: 78 / 94

PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Placing out of operation

Installation and operating manual: PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Version 05/2010

Mat. No. 737 576-AB

10 Placing out of operation

10.1 Dismounting

To disconnect the inverter:

Switch off the main power supply (fuse).

Remove cable from AC terminal.

Set DC disconnector to 0 and pull plug connector of input voltage

(DC side).

Disconnect remaining connectors as required.

Danger

Danger to life do to DC and AC high voltage!

Wear insulating protective clothing and face
protection.

Have inverters uninstalled by qualified specialists
only.
The qualified specialist personnel requires a license
from the relevant energy suppliers.

Switch off the main power supply (fuse).

Set switch knob of DC connector to 0.

Condensers require up to 30 min to discharge.
Do not touch connectors (DC/AC) for at least 5
minutes after switching off.

Ensure that the DC cables are de-energized.
It is possible that DC cables carry dangerously high
voltages even if the DC disconnector is switched off.

In case of a PLATINUM inverter without DC disconnector
and AC cable:

Disconnect in the following order:
1. Remove cable from terminal strip on AC side.
2. Pull DC plug.

Danger

Danger to life due to inverter dropping from the wall!

Use mounting elements appropriate for the mounting
wall and the weight of the inverter unit.

During mounting and dismounting:

Wear protective shoes.

Ensure a stable position.

PLATINUM Wechselrichter TL Large_GB.book Page 78 Thursday, September 2, 2010 4:13 PM

Summary of Contents for 13000 TL































































































Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands

Platinum 13000 TL, Installation And Operating Manual

Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands