Platinum 13000 TL Installation And Operating Manual Download Page 7

Page: 7 / 94

PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Safety and Dangers

Installation and operating manual: PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Version 05/2010

Mat. No. 737 576-AB

Safety and Dangers

Use inverters according to their intended use.

Use inverters in original and technically fully intact condition

without unauthorized modifications.

Ensure that inverters are installed and serviced by qualified

specialists only.

The qualified specialist personnel requires a license from the

relevant energy suppliers.

Always mount inverters in a vertical position.

Ensure that all protection devices are fully operational.

Verify that ventilation openings are not blocked or covered.

Protect inverters from direct sunlight.

Prior to installation and maintenance work, make certain that the

inverter is de-energized.

Ensure that regulations stipulated by trade associations and

inspection authorities and agencies are observed and that the

connection conditions of the relevant energy supplier or

equivalent national and international rules and regulations are

adhered to.

Observe conditions of use (see 14 Technical Data).

Intended Use

Use the inverter exclusively to feed photovoltaically converted

solar energy into the public 230 V/50 Hz mains.

Do not use the inverter in autonomous power systems.

Do not use the inverter in vehicles.

PLATINUM Wechselrichter TL Large_GB.book Page 7 Thursday, September 2, 2010 4:13 PM

Summary of Contents for 13000 TL































































































Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands

Platinum 13000 TL, Installation And Operating Manual

Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands