Platinum 13000 TL Installation And Operating Manual Download Page 55

Page: 55 / 94

PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Operation

Installation and operating manual: PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Version 05/2010

Mat. No. 737 576-AB

If the MANUALLY option is selected, the following screen will appear

the next time the date or time is set:

To set daylight saving time:

Select YES.

Press OK key.

Inverter adds 1 hour to set time.

To not set daylight saving time:

Select NO.

Press OK key.

Inverter uses set time unchanged.

Alarm volume

The inverter automatically transfers the alarm volume setting to all

network participants.

Key

Function

Increase or reduce alarm volume.

ESC

Back to menu

Settings

Accept alarm volume setting.

PLATINUM Wechselrichter TL Large_GB.book Page 55 Thursday, September 2, 2010 4:13 PM

Summary of Contents for 13000 TL































































































Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands

Platinum 13000 TL, Installation And Operating Manual

Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands