Platinum 13000 TL Installation And Operating Manual Download Page 13

Page: 13 / 94

PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Mounting

Installation and operating manual: PLATINUM Inverter 13000 TL, 16000 TL, 19000 TL, 22000 TL

Version 05/2010

Mat. No. 737 576-AB

5.4 Mounting the inverter

Note

DIEHL AKO advises against installing the inverter in living spaces.

Danger

Danger to life due to electric shock!

Have the inverter opened exclusively by the
PLATINUM service or service partners authorized by
DIEHL AKO.

Danger

Danger to life due to incorrect connection of inverter!

Have inverters installed by qualified specialists only.
The qualified specialist personnel requires a license
from the relevant energy suppliers.

Danger

Danger to life due to inverter dropping from the wall!

Use mounting elements appropriate for the mounting
wall and the weight of the inverter unit.

During mounting and dismounting:

Wear protective shoes.

Ensure a stable position.

Caution

Material damage due to unprotected installation site!

Observe admissible ambient temperature.
(see 14 Technical Data).

Caution

Material damage due to excessive dust formation!

PDegree of protection IP65 does not apply to
communication interface.

Avoid excessive dust formation.

Avoid dust formation with electrically conductive dust
particles.

PLATINUM Wechselrichter TL Large_GB.book Page 13 Thursday, September 2, 2010 4:13 PM

Summary of Contents for 13000 TL































































































Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands

Platinum 13000 TL, Installation And Operating Manual

Search results

Summary of Contents for 13000 TL

Reviews:

Brands by name

Popular brands