55
You can now insert the other two screws
and tighten all four screws using a hand-
held screwdriver.
When the face plate and gasket are fi rmly
fi xed into position, carefully cut out the
excess liner material in the middle of the
light fi tting.
Now the light fi tting in the pool wall is
exposed, you need to get the cable from
the light up through the conduit into the
deck box, where a connection can be
made.
It is easier to thread the cable through the
conduit by taping a zip tie or similar to the
end, before pushing the cable through to
the deck box.
Once you have secured the cable in the
deck box you can screw the light fi tting in
place.