10
X-Stream models only:
continue to lay
standard planks until you are five planks
from the ground including the half plank
on the Filtration wall. This is where the
bottom section of the X-Stream cut out
should be positioned.
X-stream models only:
continue laying
the standard planks until you have
reached the top of the X-Stream cut out,
make sure the hole which is cut out of 3
planks, is tapped flush with a mallet.
If you have a standard exercise pool with
a strap system continue to lay standard
planks until you reach the lower skimmer
plank. This is the second to last layer on
the filtration wall. The recess cut out to
accept the skimmer must be on the inside
of the pool.