49
INSTALLING BRIO LED LIGHTS INTO A
WOODEN POOL
Mark the position where you would like
to install a light. Be aware of any vertical
supports or other obstructions behind the
wall. This is to ensure the back of the light
fi tting will not foul against anything.
It is best to position the light
approximately half way down the pool
wall. Make sure the hole is within a single
plank as shown.
Use an 85mm hole cutter to cut the hole
for the light. Do not drill through the wall
in one go from one side.
Go around the other side of the wall and
drill from both sides to cut a neat hole
without any splintering.