28
INSTALLING THE X-STREAM COUNTER
CURRENT SYSTEM
If you have an X-stream counter current
unit place it in the pre-cut hole. It may
be necessary to even out the fitment by
packing the bottom of the unit with a thin
piece of wood or similar, from the outside
of the pool. Remove the grab bar and
facia plate from the unit and keep all parts
safe for use later.
Fix the X-stream unit in place using the
fixings supplied with the unit.
Remove the nozzles from the counter
current unit and keep all the parts in order
somewhere safe use later. Carefully stick
one of the gaskets to the unit, ensuring
the holes for the machined screws match
up. Then partially insert a screw in each
corner.
