You are advised to read this entire manual before
starting your project.
In the event of any problems please contact your
dealer immediately. Warranty claims will not be
entertained if there is delay in reporting a problem or
these instructions have not been followed correctly.
Introduction
• Do not store the wood in direct sunlight or under a
black cover as this will cause distortion which will
make installation extremely difficult.
• Assemble the pool structure as soon as possible
after receipt.
• Assemble the pool structure in one go, preferably
in the morning while the temperature is cool.
• If the pool must be stored then use a cool well-
ventilated place, sheltered from sun and rain. If
possible keep the pool in its original packaging.
• Components that are damaged, cracked or
distorted due to bad storage and/or handling on site
are not covered by warranty.
In the pre-assembly period the wood is sensitive to
variations in temperature and humidity. It is therefore
necessary that you take the following precautions
immediately after delivery.
Wood is a living material and once cut the
appearance of cracks, slight movements or changes
in colour are normal and the planks (except in
extreme circumstances) do not need replacing. The
planks will have been recently treated and may be
delivered to you still moist. In case of a rapid change
in temperature; these planks can dry very quickly and
lose 1 or 2mm of height. This might give you the
impression that they are lifting up while they are
actually shrinking.
Recommendations for Storage after Delivery
• Your filtration kit (filter, pump and any optional
heating) should be placed at least 2m from the pool
shell. You may need to purchase extra pipe and
fittings for this. A good option is to house this in a
filter box or small garden building.
• It is important to ensure the electricity supply for the
pump or any other electrical item has 30mA RCD
protection and conforms to current electrical
regulations.
• Never leave children unattended around the pool
when completed or at any stage of construction.
• The pool is designed for domestic use. Running
along the top rail, diving or jumping into the water
from the edge must not be allowed under any
circumstances. The pool is not suitable for the
addition of diving boards.
General Safety Precautions
Check the packing list detailing the contents. As you
unpack your pool check that you have all parts
required and that their condition is satisfactory.
Contact your dealer immediately if you are in any
doubt or believe parts may be missing/damaged.
Kit Contents
There are no specialist tools required but in addition
to regular hand tools the following will be useful.
• Heavy mallets for assembling walls.
• Large spirit level and set square.
• Quality battery drill with screw driver bits, drill bits
and counter sink.
• Clamps for holding components.
• Large mitre block with 90 & 22½ degree slots for
cutting pipes and liner lock.
• Large scissors for cutting underlay felt.
Required Tools
Safety Precautions
Never leave children unattended around the pool
when completed or at any stage of construction.
RISK OF DROWNING
Use safety goggles during installation to reduce risk of eye injury.
Gloves should be worn to protect fingers.
!
– 3 –
