Installing the Top Shelving (10ft models)
Installing the Top Shelving (8ft models)
• The pool is supplied with nine shelving brackets.
Carefully mark the centre of each wall and either
side of the skimmer on the top of the pool wall.
Using the 5mm x 70mm screws provided fix the top
shelving brackets to the outside of the pool wall.
These will provide support for the top shelving. Use
two screws per shelving bracket (it may be
necessary to pilot drill the wall).
• You will be supplied with eight pre-cut shelving
supports which will run along the outside perimeter
of the pool. These have 45 degree cuts at each
end. Position them so that the point of the 45
degree cut is tucked inside the overhang of the pool
wall on the outside of the structure as shown below.
• Fix into place using 5mm x 70mm screws provided.
These are screwed through the inside of the pool
wall into the shelving supports.
– 9 –
