Rev. 03 / Jan. 2019
Plasmapp Co., Ltd.
STERLINK
®
FPS-15s Plus User Manual
46
Chapter 8. Maintenance
The STERLINK
®
FPS-15s Plus sterilizer is the highest quality sterilizer that performs
reliable sterilization cycles. As the sterilizer may be deteriorated by continuous
usages, the sterilizer also needs proper maintenance to guarantee user safety and
reliable sterilization cycle. This chapter describes what kind of works and parts are
required for the maintenance of the STERLINK
®
FPS-15s Plus sterilization system.
8.1. Manual maintenance
The following maintenance procedures are performed by the user, when needed:
∎
Cleaning sterilizer exterior and interior chamber
∎
Replacing printer paper
∎
Routine sterilizer maintenance
Notes.
∎
Repairs and adjustments should only be attempted by experienced technicians who are fully
trained to maintain and repair the STERLINK
®
FPS-15s Plus sterilizer.
∎
Use of unauthorized parts for maintenance or repair could cause personal injury, result in
costly damage, or sterilizer malfunction and voids the warranty.
8.1.1. Cleaning the sterilizer exterior and interior chamber
The sterilizer exterior can be cleaned with a soft cloth and a mild, nonabrasive detergent
solution if necessary. When cleaning the sterilizer exterior, follow the guidelines:
1. Turn off the power to the sterilizer before cleaning the exterior.
2. Never allow cleaning solution or water to enter the interior or chamber.
Moisten a cloth
with nonabrasive detergent solution and use the damp cloth to clean the surfaces.
3. Do not spray cleaning solution directly on the touch screen. Use a dampened cloth to
clean the screen.
