Launch audio devices control panel
Provides a shortcut to the Windows sounds and audio devices control panel.
Ring both headset and PC
This feature gives you the option to have the PC ringtone played on both the headset as well as
the PC speaker.
When this feature is selected, the PC ringtone will be heard on both the PC speaker as well as
the headset.
When this feature is not selected, the PC ringtone will only be heard on either the headset or
the PC speaker based on how the PC audio has been set up.
Maintain headset to PC link
This feature forces the radio link to the PC to stay active even after the call has ended. This can
eliminate the need to re-establish the radio link when switching between PC audio
applications.
Help us improve this software by allowing us to collect anonymous feature usage statistics
When selected, this will allow Plantronics to collect data on feature usage patterns. This
information will only be used by Plantronics to improve the quality of our future software and
hardware products.
dial tone enabled
If this feature is selected, when a PC radio link is established, will assume the user is trying to
place a VoIP call and provide a dial tone.
If this feature is not selected, when a PC radio link is established, will sit idle.
Audio sensing enabled
Audio sensing is a special feature supported by Plantronics wireless devices that can detect an
audio signal at the USB port and automatically establish a PC radio link between the base and
wireless headset without the user having to press the PC call button. If the parameter “ dial
tone enabled” is selected, then every time a PC radio link is established the dial tone will be
heard. However, the user may have pressed the PC call button to listen to music etc. and does
not want to hear the dial tone. In this case, if the user selects the “Audio sensing enabled”
parameter, the radio link will be established automatically when any PC audio is detected at
the USB port, thus eliminating the need for the user to press the PC call button.
The About tab provides on-line access to this printable user guide and also includes
Plantronics contact information. The version of software and firmware currently running on
your system is also shown here.
Using Plantronics Update Manager, you can download new software and firmware versions
when they are available. To change settings such as checking for updates manually or
automatically or to install new updates, go to the Start menu > Programs > Plantronics >
Plantronics Update Manager.
Check for updates automatically
Select the box "Check for updates automatically" and you will be notified automatically when
new software and firmware updates are available.
About tab
Plantronics Update
Manager
34
