Planex Mini300Plus, User Manual

Page: 117 / 134

Mini300plus
3. The installation of the print server is now complete.
4. To print any data, use "lp" or "lpr" command. Enter the printer name that
has been assigned in Step 2-c in this section.
Command Format:
lp -d [printer name] [file name]
or
lpr -d [printer name] [file name]
Example: To print the /etc/hosts file, enter:
lp -d Mini300plus /etc/hosts
or
lpr -d Mini300plus /etc/hosts
Note:
Some printers with bi-directional print support may not function properly
when used with the print server. If this is the case, please refer to the user's
manual of your printer to disable the bi-directional print function of the
printer.
SUN Solaris 2.x
1. Log in to the system with the root permission.
2. Run the lpsystem command.
Format: lpsystem -tbsd [IP Address or Host Name]
Example: lpsystem -tbsd 192.72.214.103
3. Run the lpadmin command. Enter a desired name for the printer name.
Format: lpadmin -p [Printer Name] -s[IP Address or Host Name]
Example: lpadmin -pMini300plus -s192.72.214.103
4. Enable the printer with the "accept" and "enable" commands. Use the
printer name you specified in Step 3 above.