manualshive.com logo in svg

Planex Mini300Plus, User Manual, Page: 17 / 134

Share
Download
Planex Mini300Plus User Manual Download Page 17

Mini300plus

1. Attach the supplied AC power adapter to the power jack on the side of

the print server.

2. Connect the AC adapter to an AC 100V outlet.

3. Verify that the Power LED on the side of the print server illuminates.

4. When powered, the print server automatically performs a series of self-

diagnostics tests.  If no error is found during these tests, the Status LED

illuminates for a brief moment and then blinks five times. If the LED

does  not  blink  five  times,  there  is  a  chance  that  the  print  server  is  not

working  properly.    Should  you  face  the  latter  situation,  please  contact 

our technical support for further assistance.

Note:

Always use the supplied AC power adapter.  Any attempt to substitute the

power adapter with other AC power adapters may result in malfunctioning

and/or permanent breakdown of the print server.  The product warranty does

not cover damages caused by the use of other AC power adapters.  

Summary of Contents for Mini300Plus







































































































































Reviews:

No comments