Planex Mini300Plus, User Manual, Page: 111 / 134

Mini300plus
7.Select "Printer" and press Enter to display the "Serviced Printers" window.
Now click on the insert key. The utility prompts for a printer. Enter the
number of the print server port to which your printer is attached (lp1 - lp3)
and press Enter.
Example: To print via a printer attached to Port 2 on the Mini300plus, type
“lp2” in lower case.
8.Select the printer you added in Step 7, and press Enter. In the next screen,
select "Print Queues Assigned" and press Enter.
9.Press the Insert key. The print queue you specified in Step 3 will be
displayed. Select this queue and press Enter.
10.The utility will ask you to specify the priority for this queue. Simply
press the Enter key to continue.
11.Press the ESC key to return to the previous screen. Then press the F10
key to save the new settings.
12.Press ESC again.
13.From the Start but ton, select [Progr am] and then [Smart Print
Manager 3] to start the configuration utility.
14.Select the Mini300plus from the list, and click on the Manual Setup
button. Then click on "NetWare" and set the NetWare mode to "Enable".
Finally, enter the print queue name you specified in Step 3 in the Print
Server Name field. Click on the OK button.