manualshive.com logo in svg

Planex Mini100, User Manual

Share
Download
Planex Mini100 User Manual Download Page 71

122

Mini100/Mini2

●

5-3-c Using TCP/IP Protocol and PS Port

1. From the Start button, select Settings and then Printers.  Double-click on

the Add Printer icon.   Now, select My Computer and click on the Next

button. 

2. In the next screen, click on the “Add Port” button to continue. 

121

Mini100/Mini2

8. The next window asks you whether you wish to share the driver in your

network.  Select the “Share” option, and enter a Shared Name in the same

field.  Since your client PCs will recognize the print server by this name,

it is recommended to assign a name that indicates the name of your

printer. Click on the Next button.

9. The wizard will ask you whether you wish to print a test page.  Select

“Yes” and click on the Finish button.  The configuration of your printer is

complete if the test page is printed properly. 

※

If the test page does not come out properly, refer to Appendix A for

troubleshooting information.

Summary of Contents for Mini100


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands