manualshive.com logo in svg

Planex Mini100, User Manual

Share
Download
Planex Mini100 User Manual Download Page 11

2

Mini100/Mini2

1

Congratulations on your purchase of the single-port and multi-protocol print

server. The Mini100 Print Server fully supports 10BASE-T IEEE802.3 and

100BASE-TX IEEE802.3u standards.  (The Mini2 Print Server supports

10BASE-T IEEE802.3 standard.)    Both models are equipped with one

Centronics parallel port for a printer and one RJ-45 STP port for 10BASE-T

(and 100BASE-TX for Mini100) network connection, and support TCP/IP,

IPX/SPX, NetBEUI and AppltTalk protocols.  Equipped with these features,

the Mini100/ Mini2 print servers allow multiple computers to share a single

p r i n t e r. Supported platforms/ networks include NetWare, Macintosh,

Microsoft WindowsNT, Windows95/98 peer-to-peer networks as well as a

number of UNIX-based systems and Linux distributions.  Furthermore, the

supplied setup utility for Windows eases all the configuration tasks.

Some printers with bi-directional print support may not function properly

when used with the print server. If this is the case, please refer to the user’s

manual of your printer to disable the bi-directional communication feature.

Our Web site (http://www.planex.co.jp) lists all the supported printers.  

Please also note that printers with PostScript (PS) support are required to

print from Macintosh computers.  Printers without PS support do not work

properly when used with the print server. 

●

Complies with IEEE802.3 10BASE-T standard (Mini2)

●

Complies with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX

standards (Mini100)

●

Equipped with one 10BASE-T RJ-45 STP port (Mini2)

Chapter 1

Introduction

1

1

Product Overview

1

2

Features

●

Equipped with one 10BASE-T / 100BASE-TX RJ-45 STP port (Mini100)

●

Equipped with one Centronics parallel port that directly attaches to a

printer *

●

Supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols 

●

LED Indicators display the latest working status of the print server

●

The on-board Flash ROM allows firmware update

●

Supports Windows95/98, Wi n d o w s N T, NetWare 3.X/4.X/5.x, Macintosh

and UNIX/ Linux platforms

※

The parallel port may not directly attach to some printers.

Open the shipping carton of the Print Server and carefully unpack its

contents.  The carton should contain the following items:

●

Mini100/Mini2 Ethernet Print Server x 1

●

Setup Diskette x 1

●

AC Power Adapter x 1

●

This User’s Manual 

If any item is found missing or damaged, please contact your local PCI

reseller for replacement.  

1

3

Packing List

Summary of Contents for Mini100


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands