manualshive.com logo in svg

Planex Mini100, User Manual

Share
Download
Planex Mini100 User Manual Download Page 16

1. Set the supplied floppy diskette with “Setup Disk” label to the floppy

drive of your PC.

2. From the Start button on the desktop, select Run and enter “A:\SETUP”

(if your floppy drive is Drive A) in the displayed field.  Click on the OK

button.

12

Mini100/Mini2

11

Mini100/Mini2

6. After the software has been installed, the following screen will be

displayed.  Click on the Finish button to exit the installation wizard.

■

Uninstalling the Utilities

To uninstall the utilities, first click on the Start button and select Settings

and then Control Panel.   Click on an item labeled “Planex Print Server for

Windows95/98” and then click on the “Add / Remove” button.  The

Mini100/Mini2 utility (utilities) will be uninstalled from the system.  

※

To use Smart Print Manager 2, IPX protocol is required.  If you are using

Windows95/98, add “IPX/SPX compatible protocol”.  For more details,

refer to the section on adding IPX/SPX protocol in Chapter 4. 

3

2

Installation under WindowsNT

Summary of Contents for Mini100


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands