100
Mini100/Mini2
5. The new port should be now visible in the Available Ports list (see
below). Click on the Next button.
6. Refer to the user’s manual of your printer and select the manufacturer and
printer in the two lists.
99
Mini100/Mini2
4. A window labeled “Add Port” will be displayed. Click on the IPX tab.
After a while, the wizard detects your print server. Click on the print
server name (under Device Name) and click on the OK button.
※
If your print server is not detected, refer to Section 4-2-b in Chapter 4 and
check whether IPX protocol has been installed. If the same problem
persists even though the protocol is installed, check whether “NetWa r e
Network Client” has been set up. If not, add this client component.
Summary of Contents for Mini100
Page 2: ......
