。
Port Mode
VLAN Membership
Frame Leave
Access
Belongs to a
single
untagged VLAN
Untagged
( Tag=PVID be removed)
Always Untag
Allowed to belongs to
multiple
untagged
VLANs at the same time
Untagged
(Tag=PVID be removed)
Trunk
Allowed to belongs to
multiple
Tagged
VLANs at the same time
Tagged
(Tag=PVID or Original VID be remained)
Port VID (PVID)
Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for
accommodating devices that you want to participate in the VLAN but that don’t support tagging. The Switch allows
each port to set one PVID, the range is 1~255, default PVID is 1. The PVID must be the same as the VLAN ID that
the port was defined as belonging to in the VLAN group, or the untagged traffic will be dropped.
1.
Select
802.1Q VLAN
in the
VLAN Type
field and click on the
“OK”
button.
The main page then changes to the
802.1Q VLAN
table which displays the VLAN configuration of each port.
2.
If you want to configure port #2 to be in a VLAN other than default VLAN. Double click on
“port2”
to enter into
VLAN port configuration window.
