6. At
the
Port 1-
VLAN Port configuration page, select
VLAN 2
and
VLAN 3
to
add
to the
Port 1
. The right
information window at this table shows the status. The screen in Figure 7-4 appears.
Figure 7-4
Assign Port-1 to be VLAN 2 and VLAN 3 member.
7. After the down the Port 1 VLAN configuration, press “
close
” to back to the 802.1Q VLAN main screen. And
check if the setting be applied to Port 1 at the “
Egress Policy
” column. The screen in Figure 7-5 appears.
Figure 7-5
Port 1 VLA N status
8. Assign
the
VLAN 2
and
VLAN 3
group member. At this case,
Port 2
had been assigned to as
VLAN 2
group
member and
Port 3
be assigned to as
VLAN 3
group member.
9. Repeat step 2 to step 7, expect that :
•
Configure the Port 2 with
PVID=2
, Port 3 with
PVID=3
.
•
The link type of both Port-2 and Port 3 are “
Always Untag
”.
