show port state
Show port infomation
show port storm-limit
Show port storm limit mode and rate
show qos map cos-queue-map
Show qos map cos-queue-map
show qos map dot1p-cos-map
Show qos map cos-queue-map
show qos map mac-cos-map
Show qos map mac-cos-map
show qos map port-cos-map
Show each port's cos
show qos map vlan-cos-map
Show qos map vlan-cos-map
show qos queue egress-policy
Show qos queue egress-policy
show radius
Show radius information
show security MAC-aging
Show MAC aging time
show security filter-MAC
Show MAC filter entry
show security mac-learning
Show port security status
show security static-MAC
Show static mac table information
show snmp
Show snmp information
show snmp rmon
Show snmp rmon state
show spantree
Show spanning tree information
show syntax
Show basic help infomation
show system
Show system information
show trunk
Show trunk information
show version
Get last software version
show vlan
Show vlan information
show vlan type
Show current vlan type
3.5.2 Privileged Command
To access to the second level, enter the
“enable”
command in the first level. The sysem then prompt for a
password. Please enter
“password”
for the password.
The promt then changes to
“Switch\enable>”
. Entering a question mark
"?"
at the prompt displays the list of
commands available for command mode.
3.5.2.1 Clear command
Clear command is to clear the parameter. The follow table lists the clear commands and the equivalent usages.
Command
Description
clear channel
Clear member from channel
clear dot1x local-userInfo
Clear igmp-snooping group policy
clear igmp-snooping policy deny
Clear igmp snooping policy deny
clear mirror monitored-port egress
Clear egress monitored port for mirror
