Planet VRT-402N User Manual Download Page 6

Page: 6 / 66

Chapter 1 Introduction

Thank you for purchasing VRT-402N. This manual guides you on how to install and properly use the
VRT-402N in order to take full advantage of its features.

1.1 Package

Contents

•

VRT-402N x 1

•

Antenna

•

Ethernet Cable x 1

•

Power Adapter x 1

•

CD-ROM (included user’s manual) x 1

•

Quick Installation Guide x 1

Note:

If any of the above items are missing, please contact your supplier for support.

1.2 Features

Router / NAT Features

Access Private LAN Servers from the Public Network

Equipped with four LAN ports (10/100Mbps) and one WAN port (10/100Mbps), Auto-MDI/MDI-X

supported

Supports DHCP Server

System status monitoring includes Active DHCP Client, Security Log and Device/Connection

Status

Web-based GUI for and Wizard setup for easily configuration

Remote Management allows configuration and upgrades from a remote site

Supported Internet types: Dynamic / Static IP / PPPoE / PPTP / L2TP

Supports UPnP function

Firewall / Security Features

MAC / IP filter access control, URL blocking ; SPI fi DoS prevention protection

Built in NAT firewall

Predefined/User-defined service database

Enable/disable VPN pass-through

VPN Features

Site-to-site/Client-to-VPN gateway connection capability

IKE Keying Methods: Auto (Pre-shared Key), Manual Keying

Authentication:

MD5/SHA-1

Encryption:

DES/3DES/AES

Adjustable IKE SA Life time

PPTP VPN tunnels : 10

IPsec VPN tunnels : 25

Wireless Features

IEEE 802.11n wireless technology compliant with 802.11b/g standard

Supports Wi-Fi Protected Setup (WPS)

Advanced security: 64/128-bit WEP, WPA –TKIP(PSK), WPA2-AES(PSK), 802.1x

Max WDS mode link cloud be set up to 4 sets.

Multiple SSID (Two SSID )and hidden SSID broadcasting

Summary of Contents for VRT-402N



































































Search results

Summary of Contents for VRT-402N

Reviews:

Planet VRT-402N, User Manual, Page: 6 / 66

Search results

Summary of Contents for VRT-402N

Reviews: