Add DBM Rule
It is very simple to set-up a DBM rule, users only need to set the IPs to be controlled in the
DBM IP ranges.
After assignment of the DBM IPs, the Router will dynamically control the bandwidth by equality
and priority methods
Click on [Add] tab. You will see the following screen.
Configure [Add DBM] Settings following the instructions below
Sequence Number
This defines the sequence of the DBM rules.
Rule Name
Name of the DBM rule.
Rule Enable
Enable/Disable this DBM rule
Internal IP Range
Set up the internal IP range for this DBM rule.
DBMSetting Example
The maximum DBM IPs is 16 in the VRT-402N. The user may set the DHCP releasing range
from 192.168.2.30 to 192.168.1.45 and set those IP as DBM IP accordingly. In this manner, all
user access through this router will be controlled by DBM system without any other
complicated settings.
48
Summary of Contents for VRT-402N
