Planet VRT-402N, User Manual

Page: 45 / 66

Add SBM Rules
Click on [Add] tab. You will see the following screen.
Configure [Add SBM] Settings following the instructions below.
Sequence Number This defines the sequence of the SBM rules. If a packet fits the conditions set
by the SBM rules, the packet will then be sorted according to the first SBM rule
from the top of the list.
Rule Name Name of the SBM rule.
Rule Enable Enable/Disable this SBM rule
Internal IP Set up the internal IP for this SBM rule.
Protocol Set up the protocol (TCP or UDP) for the ACL to be enabled.
External Interface Please select which External Interface (WAN1 or WAN2) you want a packet to
go through, IF the packet fits the condition of this SBM rule.
Service Port Range Set up the Service Port Range (e.g., HTTP is TCP/80) for the SBM to be
enabled.
Bandwidth Allocation By Ratio or By Bandwidth
Ratio The ratio of the whole bandwidth according to the External Interface.
Download Enter the reserved download bandwidth.
Upload Enter the reserved upload bandwidth.
Utilize Bandwidth More
than Guaranteed
Check this box if you wish to allow the traffic confirming this SBM rule to be
able to utilize the whole bandwidth when the bandwidth is idle.
45