Planet VRT-402N, User Manual

Page: 34 / 66

MAC Access Control Choose Enable/Disable to enable/disable MAC access Control
Default MAC Access Control
Action
The default ACL action of the ACL rules. When you add the individual rules,
it can be viewed as exceptions and take effects relating to the default action.
If the action of the adding rule is the same as the default action, then this
rule will not work.
Sequence Number This defines the sequence (priority) of all the MAC ACL actions.
Rule Name Name of the MAC access rule.
MAC Set up the MAC Address to which you would like to enable the MAC ACL action.
Action Choose ALLOW/DENY to ALLOW/DENY
ACL Enable Enable/Disable this MAC access rule
Static ARP Enable Enable/Disable this Static ARP rule
Static DHCP Enable Enable/Disable this Static DHCP rule
IP The IP address corresponds to static ARP or static DHCP.
3. Click on [Add] tab. You will see the following screen.
4. Example: Bind IP to a MAC
If users need to bind an IP to a specified MAC (network device), one can follow the settings as
below.
Sequence Number User1
Rule Name Enable
MAC 00:30:4F:55:66:77
Action Allow Access
ACL Enable Enable
Static ARP Enable Enable
Static DHCP Enable Enable
IP 192.168.0.100
34