Parameters
Description
IP
This is the IP address that your ISP has given you.
Subnet Mask
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
DNS
This is the ISP’s DNS server IP address
Gateway IP
This is the ISP’s IP address gateway
TTL
This is optional. Some ISP will check the TTL response to build
up the connection. When you select Enabled, VRT-401G will
respond the TTL time plus 1.
Click <
OK>
when you have finished the configuration above.
Congratulations
! You have
completed the configuration for the Fixed-IP x DSL connection. You can start using the router
now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
1.3 PPPoE
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
19
Summary of Contents for VRT-401G
Page 1: ...54M Wireless VPN Firewall Router VRT 401G User s Manual 1...
Page 37: ...AP Mode setting Page Station Ad Hoc mode setting page 37...
Page 38: ...Station Infrastructure mode setting page AP Bridge Point to Point mode setting page 38...
Page 39: ...AP Bridge Point to Multi Point mode setting page AP Bridge WDS mode setting page 39...