Connection Type
When select the Initiator, the tunnel will automatically
connect at the boot time. When select the Responder,
the tunnel will connect only when you pressed the
“Connect” button.
Local/Remote ID
Specify the ID of local site and remote site. It can be IP
address, Domain Name, or E-Mail address.
Auth
Method
Choose PSK or RSA and fill the key for the
authentication.
Click <
Apply Changes>
at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)
Advanced VPN Setting
Parameters
Description
Encryption
Choose the encryption type with the remote peer. It can
be 3DES or AES128.
Note:
If you choose the wrong method, the connection
may not be established.
Hash/Authentication
Choose the hash method with the remote peer. It can be
MD5 or SHA1.
Note:
If you choose the wrong method, the connection
may not be established.
70
Summary of Contents for VRT-401G
Page 1: ...54M Wireless VPN Firewall Router VRT 401G User s Manual 1...
Page 37: ...AP Mode setting Page Station Ad Hoc mode setting page 37...
Page 38: ...Station Infrastructure mode setting page AP Bridge Point to Point mode setting page 38...
Page 39: ...AP Bridge Point to Multi Point mode setting page AP Bridge WDS mode setting page 39...