6: Click
OK
to confirm the setting. Your PC will now obtain an IP address automatically from
your Broadband Router’s DHCP server.
Note
: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN.
Once you’ve configured your PC to obtain an IP address automatically, please proceed to
Step 3.
2d) Windows NT
1: Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control Panel
window will appear.
2: Double-click
Network
icon. The
Network
window will appear. Select the
Protocol
tab from
the
Network
window.
3: Check if the
TCP/IP Protocol
is on your list of
Network Protocols
. If TCP/IP is not installed,
click the
Add
button to install it now. If TCP/IP is installed, go to
step 5
.
4: In the
Select Network Protocol
window, select the
TCP/IP Protocol
and click the
Ok
button
to start installing the TCP/IP protocol. You may need your Windows CD to complete the
installation.
5: After you install TCP/IP, go back to the
Network
window. Select
TCP/IP
from the list of
Network Protocols
and then click the
Properties
button.
11
Summary of Contents for VRT-401G
Page 1: ...54M Wireless VPN Firewall Router VRT 401G User s Manual 1...
Page 37: ...AP Mode setting Page Station Ad Hoc mode setting page 37...
Page 38: ...Station Infrastructure mode setting page AP Bridge Point to Point mode setting page 38...
Page 39: ...AP Bridge Point to Multi Point mode setting page AP Bridge WDS mode setting page 39...
